Specializing in the production of bus processing machine manufacturers

3-3D200/220 semi-automatic bus processing machine

Specializing in the production of bus processing machine manufacturers

use  This machine is mainly used for all kinds of high and low voltage power transmission and distribution complete sets of electrical and copper and aluminum busbar process processing such as power transformers, busbar trays, etc., respectively used for copper and aluminum busbar cutting, punching, bending, folding and other processes .
main feature One machine and four stations are synchronized and used independently at the same time. The shearing station is hydraulic and automatic pressing device. The processed parts are not easily deformed. The five-arm punching frame comes with five common molds. The digital ruler is equipped with a proximity switch device. The bending angle It's clear at a glance.
Station function Various molds such as shearing, punching, bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional.
Electronic control function Start at any time, stop automatically, save electricity and fuel, equipped with preheating function.

 Bending station  Punching station Shearing station 
        

advantage
1. Shearing automatic downward pressure type, upper and lower rubber devices, easy to cut short rows
2. Guide groove, no waste after shearing, small section slope
3. There is no need to adjust the blade gap for 3-15mm copper and aluminum bars
4. Equipped with guide sleeve punching mold, long service life, high punching accuracy, saving mold cost
5. The punching has its own waste collection box for smooth waste discharge
6. Can solve the punching process after bending
7. Double-cylinder blanking device, the punching waste is discharged smoothly, and the lower die is not easy to damage
8. The punching light source is aligned, the operation is simple and flexible
9. The digital ruler is equipped with a proximity switch device, which is simple and convenient to adjust the bending angle
10. The four-guide column design of the bending station, five points and one line, long service life of the bending station
11. All kinds of bending dies can be interchanged, no need for professional CNC personnel to operate
12. Compared with traditional CNC, the overall cost of this machine is lower

The main technical parameters
Nominal pressure 3*550KN
Bending specifications 200*15mm/220*15mm
Punching specification Φ4.3-Φ34
Shear specification 200*15mm/220*15mm
Motor oil station 3*4KW/31.5mpa/380V/50Hz
Dimensions 1700*1500*1400
Machine weight 1.82T