use | This machine is mainly used for the processing of copper and aluminum busbars of various high and low voltage power transmission and distribution complete sets of electrical and power transformers. It is used for cutting, punching, bending, embossing, folding, and pressing Thread nose and other processes. |
main feature | One machine and five stations are synchronized and used independently at the same time. There is no waste after the shear station is cut. The high-precision six-arm punching die set, large bending, small bending (fold back shape), crimping nose, and pitting process Both can be operated independently to quickly improve the processing capacity. |
Station function | Various molds such as cutting, punching, bending, bending, pressing pitting, embossing, pressing cable joints, etc. can be interchanged independently in the workstation, and equipped with vertical bending molds for interchangeable use. |
Electronic control function | PLC fully automatic control, start at any time, automatic stop, power and fuel saving, equipped with preheating function. |
Bending station | Punching station | Shearing station |
advantage
1. Shearing automatic downward pressure type, upper and lower rubber devices, easy to cut short rows
2. Guide groove, no waste after shearing, small section slope
3. 3-12mm copper and aluminum bars do not need to adjust the blade gap
4. High-precision six-arm punching die set, easy to use, no need to change one
5. The high-precision guide sleeve punching die has a long service life, high punching accuracy, and saves die costs
6. Double-cylinder blanking device, the punching waste is discharged smoothly, and the lower die is not easy to damage
7. The punching light source is aligned, the operation is simple and flexible
8. PLC full program control input: angle bending and height and width mode, solve various angle bending, and quickly increase mass production
9. Fully open bending station is convenient and quick to operate, independent size
10. Dedicated embossing and folding station, which can quickly increase the workload, and the bending can be processed with special shapes (U-shaped bend)
The main technical parameters
Nominal pressure | 3*350KN/1*200KN |
Bending specifications | 160*12mm |
Punching specification | Φ4.3-Φ25 |
Shear specification | 160*12mm |
Motor oil station | 3*4KW/50mpa/1.5KW/20mpa/380V/50Hz |
Dimensions | 1900*1400*1300 |
Machine weight | 1.92T |