| use | This machine is mainly used for processing copper and aluminum busbars of various high and low voltage power transmission and distribution complete sets of electrical and power transformers. It is used for copper and aluminum busbar cutting, punching, bending, folding and other processes. |
| main feature | One machine and three stations are synchronized and used independently at the same time. The shear station has no waste after cutting. The high-precision five-arm punching die set comes with five common molds. The digital ruler is equipped with a proximity switch device, and the bending angle is clear at a glance. |
| Station function | Various molds such as shearing, punching, bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional. |
| Electronic control function | Start at any time, stop automatically, save electricity and fuel, equipped with preheating function. |
| Bending station | Punching station | Shearing station |
|
|
|
advantage
1. Shearing automatic downward pressure type, upper and lower rubber devices, easy to cut short rows
2. Guide groove, no waste after shearing, small section slope
3. 3-12mm copper and aluminum bars do not need to adjust the blade gap
4. High-precision six-arm punching die set, easy to use, no need to change one
5. The high-precision guide sleeve punching die has a long service life, high punching accuracy, and saves die costs
6. Double-cylinder blanking device, the punching waste is discharged smoothly, and the lower die is not easy to damage
7. Positioning of the punching station scale, high batch operation efficiency and convenient and quick punching of four holes
8. The original (patented) (small) U-shaped bending of the bending station is easy to operate, and the exchange process of various molds is simple and convenient
9. The bending station is designed with four guide pillars and the processing rod is long and can be flipped directly, five points and one line, long service life
10. PLC full program control input: angle bending mode and trigonometric function, solve this kind of angle bending, and quickly increase mass production
The main technical parameters
| Nominal pressure | 3*350KN |
| Bending specifications | 160*10mm |
| Punching specification | 4.3-25 |
| Shear specification | 160*12mm |
| Motor oil station | 3*4KW/25mpa/380V/50Hz |
| Dimensions | 1620*1420*1300 |
| Machine weight | 1.3T |
