| use | This machine is mainly used for processing copper and aluminum busbars of various high and low voltage power transmission and distribution complete sets of electrical and power transformers. It is used for copper and aluminum busbar cutting, punching, bending, folding and other processes. |
| main feature | One machine and three stations are synchronized and used independently at the same time. The shear station has no waste after cutting. It comes with 14 sets of commonly used molds, double cylinder blanking device, smooth discharge of punching waste, PLC program control and digital ruler with proximity switch device Hand and automatic switchable, easy and convenient bending angle |
| Station function | Various molds such as shearing, punching, bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional. |
| Electronic control function | PLC fully automatic control, start at any time, automatic stop, power and fuel saving, equipped with preheating function. |
| Bending station | Punching station | Shearing station |
|
|
|
advantage
1. Shearing automatic downward pressure type, upper and lower rubber devices, easy to cut short rows
2. Guide groove, no waste after shearing, small section slope
3. 3-12mm copper and aluminum bars do not need to adjust the blade gap
4. 14 punching station with positioning device is convenient for positioning, no need to change mold, no need to change one
5. The high-precision guide sleeve punching die has a long service life, high punching accuracy, and saves die costs
6. Double-cylinder blanking device, the punching waste is discharged smoothly, and the concave and convex molds are not easily damaged
7. The punching light source is aligned, the operation is simple and flexible
8. The digital ruler is equipped with a proximity switch device, which is simple and convenient to adjust the bending angle
9. The original open design of the bending station and the universal steering punch can process special curved bends (U-shaped bends)
10. PLC program control input: angle mode and height and width mode, solve this kind of angle bending, and quickly increase mass production
The main technical parameters
| Nominal pressure | 3*550KN |
| Bending specifications | 160*12mm |
| Punching specification | Φ4.3-Φ25 |
| Shear specification | 160*12mm |
| Motor oil station | 3*4KW/30mpa/380V/50Hz |
| Dimensions | 1650*1400*1400 |
| Machine weight | 1.6T |
