Specializing in the production of bus processing machine manufacturers

ZYMX3-3LT1K Copper busbar processing machine

Specializing in the production of bus processing machine manufacturers

use

This busbar processing machine is mainly used for the processing of copper and aluminum busbars of various high and low voltage power transmission and distribution complete sets of electrical and power transformers. It is used for cutting, punching, bending, bending, and other processes of copper and aluminum busbars.

main feature

One machine and three stations are synchronized in one, and can be used independently at the same time. There is no waste after cutting at the cutting station. The high-precision five-arm punching die set has its own light source positioning and scale positioning. Double-cylinder blanking device, smooth punching waste discharge , Digital ruler is equipped with proximity switch device, large and small bending station pressure adjustment, manual and numerical control can be freely converted, the bending angle is simple and convenient.

Station function

Various molds such as shearing, punching, PLC program-controlled bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional.

Electronic control function

Start as you use it, stop automatically, save electricity and fuel, equipped with preheating function

advantage
1. Shearing automatic downward pressure type, up and down rubber device, easy to cut in short rows,
2. Guide trough, no waste after shearing, small inclination of section
No need to adjust the blade gap for

 3.3-12mm copper and aluminum bars
4. High-precision five-arm punching die set, easy to use, no need to change one
5. Double-cylinder blanking device, the lower die is not easy to damage
6. Punching light source alignment and scale positioning, punching operation is simple and flexible
7. Double oil cutting device, smooth waste discharge
8. The original bending station tie rod design is equipped with a universal steering punch, which can process special return shapes (U-shaped bends)
9. The bending station can interchange all kinds of molds easily and quickly
10.PLC program control mode is divided into: angle mode and trigonometric function mode operation is quick and does not require professional CNC personnel to operate (optional)


The main technical parameters

Nominal pressure

350KN

Cut specifications

12×160mm

Hole processing range

Φ4.3~27mm

Maximum processing size of flat bending

12×160mm

Voltage

380V/50HZ/3×4KW

Machine dimensions

1700mm×1300mm×1410mm

Machine weight

about 1500kg