| use | This machine is mainly used for all kinds of high and low voltage power transmission and distribution complete sets of electrical and copper and aluminum busbar process processing such as power transformers, busbar trays, etc., respectively used for copper and aluminum busbar cutting, punching, bending, folding and other processes . |
| main feature | One machine and three stations are synchronized and used independently at the same time. The shearing station hydraulic automatic pressing device, the processed parts are not easy to deform, the high-precision single-arm punching die set, comes with six common molds, and the digital ruler is equipped with a proximity switch device. The bending angle is clear at a glance. |
| Station function | Various molds such as shearing, punching, bending, vertical bending, pressing pitting, flat pressing, and pressing cable joints can be interchanged independently in the workstation, and the matching specifications are optional. |
| Electronic control function | Start at any time, stop automatically, save electricity and fuel, equipped with preheating function. |
| Bending station | Punching station | Shearing station |
|
|
|
advantage
1. Shearing automatic downward pressing type, upper and lower rubber device, short row easy to cut, and equipped with automatic pressing device
2. Guide groove, no waste after shearing, small section slope
3. There is no need to adjust the blade gap for 3-15mm copper and aluminum bars
4. The high-precision guide sleeve punching mold has a long service life, high punching accuracy, and saves mold costs
5. Can solve the punching process after bending
6. Double-cylinder blanking device, the punching waste is discharged smoothly, and the lower die is not easy to damage
7. The digital ruler is equipped with a proximity switch device, which is simple and convenient to adjust the bending angle
8. Four-guide column design for bending station, five points and one line, long service life
9. All kinds of bending molds can be interchanged, no need for professional CNC personnel to operate
10. Compared with traditional CNC, the overall cost of this machine is low
The main technical parameters
| Nominal pressure | 3*550KN |
| Bending specifications | 260*10mm |
| Punching specification | Φ4.3-Φ34 |
| Shear specification | 260*15mm |
| Motor oil station | 3*4KW/31.5mpa/380V/50Hz |
| Dimensions | 1700*1500*1400 |
| Machine weight | 1.82T |
